Troubleshooting - Electrolux TE1120 Benutzerinformation

18 www.electrolux.com
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum ribs. Dry the cleaned surfaces with a
soft cloth.
CAUTION!
Do not use abrasive materials
or steel wool to clean the
drum.
11.5 Cleaning the control panel
and housing
Use a standard neutral soap detergent to
clean the control panel and housing.

12. TROUBLESHOOTING

Problem
The tumble dry-
er does not op-
erate.
Possible cause
1)
The tumble dryer is not connec-
ted to mains supply.
The loading door is opened.
The ON/OFF button was not
pushed.
The Start/Pause button
was not pushed.
The appliance is in the standby
mode.
The filter is missed or in wrong
position.
The E59 error code on the display
- dryer overloaded.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
CAUTION!
Do not use furniture cleaning
agents or cleaning agents
which can cause corrosion to
clean the appliance.
11.6 Cleaning the airflow slots
Use a vacuum cleaner to remove the fluff
from the airflow slots.
Connect in at mains socket.
Check fuse in fuse box (domestic
installation).
Close the loading door.
Push the
Push the
ton.
Push the
Insert the filter in the right posi-
tion.
Unload part of the laundry. Obey
the maximum load.
Remedy
ON/OFF button.
Start/Pause but-
ON/OFF button.