Electrical Connection - Electrolux TE1120 Benutzerinformation

Exhaust air must not be discharged into a flue which is
•
used for exhausting fumes from appliances burning gas
or other fuels. (if applicable)
The ventilation openings in the base (if applicable) must
•
not be obstructed by a carpet.

1.3 Electrical connection

WARNING!
Risk of fire and electrical shock.
The appliance must be correctly earthed. The
•
manufacturer is not responsible for the consequences
of an inadequate earthing system.
Make sure that the electrical information on the rating
•
plate agrees with the power supply. If not, contact an
electrician.
Always use a correctly installed shockproof socket.
•
Do not use multi-plug adapters and extension cables.
•
Do not pull the mains cable to disconnect the appliance.
•
Always pull the mains plug.
Do not touch the mains cable or the mains plug with
•
wet hands.
If the supply cord is damaged, it must be replaced by
•
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
Only for UK and Ireland. The appliance has a 13 amp
•
mains plug. If it is necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS 1362) fuse.
This appliance complies with the E.E.C. Directives.
•
1.4 Use
WARNING!
Risk of injury, electrical shock, fire, burns or
damage to the appliance.
Obey the maximum load volume of 8kg (refer to the
•
"Programme chart" chapter).
Do not use the appliance if industrial chemicals have
•
been used for cleaning.
ENGLISH 5