Installation; Closing The Door - Küppersbusch EWK1782ZCN Benutzerinformation

22
If the advice does not lead to
the desired result, call the
nearest brand-mark service.
Replacing the lamp Wine Cellar
1. Disconnect the mains plug from the
mains socket.
2. Remove the lamp cover by pressing it
inwards with a tool (e.g. screwdriver) to
free the rear side hookings.
3. At the same time, free the middle hook
and slide off the cover in the direction of
the arrows.

INSTALLATION

WARNING! Refer to Safety
chapters.
Positioning
This appliance can be installed in a dry, well
ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
4. Replace the used lamp with a new lamp
of the same type and specifically
designed for household appliances and
having the same characteristics.
5. Connect the mains plug to the mains
socket.
6. Open the door. Make sure that the lamp
comes on.

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the Service Center.
Cli- Ambient temperature
mate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C