Control Panel - IKEA HO EV W Betriebshandbuch

PRODUCT SHEET

Control panel

Preliminary information for correct use of the hood:
Use the highest speed in case of particularly concentrated cooking steam. It is advisable to switch the hood on 5 minutes before
starting to cook and leave it running for another 15 minutes at the end of cooking.
Automatic switching on function
The hood is equipped with a temperature sensor that activates the motor at extraction speed (power) 1 when the
temperature in the area around the hood exceeds 70°C.
The user can in any case switch off or change the extraction speed (power) (see section "Extraction speed (power)
control").
Extraction speed (power) control
Led
Extractor power Selection button
Light switch
Extraction speed (power) selection is cyclic according to the speed sequence
stand-by - 1 2 3 4
→ → → →
therefore every time the "extraction power selection" button is pressed, the extraction speed (power) increases by one level
and switches off (Stand-by) if the button is touched again when the hood is on extraction speed (power) 4.
Note: Extraction speed (power) 4 remains on for 5 minutes, after which the extraction motor switches to speed 2..
By pressing it again the extraction motor switches off (Stand-by).
The hood can also be switched off (Stand-by) when it is on any speed, by prolonged pressing (more than 3 seconds) of the
button.
The control panel has a led that changes colour according to the extraction speed (power), therefore hood extraction speed
(power) can be determined as follows:
Hood on stand-by: LED OFF
extraction speed (power) 1 - Led GREEN
extraction speed (power) 2 - Led ORANGE (amber)
extraction speed (power) 3 - Led RED
extraction speed (power) 4 - Led RED FLASHING
5019 618 33100/A
LI29WA
N RUS BG RO
S DK
D GB F NL E P I GR FIN
PL CZ SK H