IKEA HO EV W Betriebshandbuch Seite 18

PRODUCT SHEET
7
6
3
5
1. Control panel
2. Grease filter
3. Light
4. Inside light
5. Steam deflector
6. Aesthetic pattern
7. Support cables
8. Interconnection cable
9. Boss
Lamp maintenance
1. Disconnect the hood from the power supply.
2. Replace the damaged lamp. (Fig.1).
3. Only use halogen lamps 20W max GU4 - 12V - Ø 35mm
- 30° - Dichoric, taking care not to touch them with hands.
Replacing the inside lamps
Pull the pattern downwards and unscrew the damaged lamp;
only use 40W max (E14) olive-shaped lamps.
Grease filters:
The metal grease filter has an unlimited life and must be
cleaned once a month by hand or in a dishwasher at a low
temperature and with a short cycle. Cleaning in a dishwasher
may cause discolouring of the grease filter, but its filtering
efficiency is unaffected.
Grease filter maintenance:
1. Disconnect the hood from the power supply.
2. Remove the grease filter (Fig.2) by pulling the spring
release handle.
3. Remove the carbon filter fitted on the grease filter.
Carbon filter maintenance
The carbon filter must be cleaned once a month in a
dishwasher at the highest temperature, using a normal
dishwasher detergent. Wash the filter separately.
After washing, reactivate the carbon filter by drying it in the
oven at 100°C for 10 minutes.
Change the carbon filter every 3 years
5019 618 33100/A
D GB F NL
9
8
4
3
1
2
E P I GR
Fitting the carbon filter:
1. Remove the grease filter (Fig. 2).
2. Place the carbon filter on the grease filter.
3. Clamp the carbon filter with the special metal catches.
(Fig.3).
4. Reinsert the grease filter complete with carbon filter.
Fig.1
N
S DK
FIN
PL
Fig.2
Fig.3
RUS BG RO
CZ SK H
LI29WA