Product Description; Control Panel - IKEA SVAVANDE 403.890.89 Bedienungsanleitung

ENGLISH

Product description

Control Panel

BUTTON FUNCTION
Turns the motor on/off at speed one.
Attention: the product is with the filter alarm disabled.
=
Press and hold the button for approximately 2 seconds, with all the loads turned off
Speed
(Motor+Lights), to turn the grease filter alarm on. LED (B) flashes twice to confirm.
To turn the alarm off, press the button again and hold for at least 2 seconds. The relevant
LED (B) flashes once.
Turns the motor on at speed two / Activate charcoal filter alarm.
Attention: the product is with the filter alarm disabled.
=
Press and hold the button for approximately 2 seconds, with all the loads turned off
Speed
(Motor+Lights), to turn the Activated Charcoal Filter alarm on. LED (A) flashes twice to confirm.
To turn the alarm off, press the button again and hold for at least 2 seconds.The relevant LED
flashes once (A). Only for recirculation mode.
Turns the Motor on at speed three / Reset alarm grease filter saturation.
=
Press and hold the button for approximately 2 seconds, with all the loads turned off
Speed
(Motor+Lights), to reset the grease filter saturation alarm or charcoal filter alarm. LED (A)
flashes three times.
Turns the motor on at Booster speed.
This speed is timed to run for 6 minutes. At the end of this time, the system returns
=
automatically to the speed that was set before. If it is activated with the motor turned off, it
Speed
will switch to OFF at the end of the time. To deactivate it, press button D or press button A.
Press briefly: Turns the lighting system on and off at maximum intensity.
=
Press and hold to change the lighting intensity up or down.
Light
Upper chimney
Lower chimney
Hood body
LED Lighting
Grease filter
Control panel
8