Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Eu Declaration Of Conformity - Scheppach Cd12V Originalbetriebsanleitung

Akku-bohrschrauber
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

– Further supplementary take-back conditions of the
manufacturers and distributors can be obtained
from the respective customer service.
• If the manufacturer delivers a new electrical appliance
to a private household, the manufacturer can arrange
for the free collection of the old electrical appliance
upon request from the end user. Please contact the
manufacturer's customer service for this.
• These statements only apply to devices installed and
sold in the countries of the European Union and which
are subject to the European Directive 2012/19/EU. In
countries outside the European Union, different regu-
lations may apply to the disposal of waste electrical
and electronic equipment.

14 Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your product failing to work
properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
The product cannot be started.

15 EU Declaration of Conformity

Translation of the original Declaration of Conformity
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
We declare under our sole responsibility that the product
described here complies with the applicable directives
and standards.
Brand:
Art. designation:
Art. no.
EU directives:
2014/30/EU, 2006/42/EG, 2011/65/EU*,
* The object of the declaration described above fulfils the
regulations of the directive 2011/65/EU of the European
Parliament and Council from 8th June 2011, on the re-
striction of the use of certain hazardous substances in
electrical and electronic equipment.
Applied standards:
EN 62841-1:2015/A11:2022;
EN 62841-2-1:2018/A12:2022;
EN IEC 55014-1:2021;
EN IEC 55014-2:2021
22 | GB
Possible cause
The battery power is too weak.
The battery is not properly inserted.
The direction of rotation switch is in
the centre position.
SCHEPPACH
Cordless drill -
CD12V
5909299948
www.scheppach.com
Notes on lithium-ion batteries
Remove the battery before disposing of the de-
vice!
• Do not dispose of batteries in household waste, in a
fire (risk of explosion) or in water. Damaged batteries
can harm the environment and your health if toxic va-
pours or liquids escape.
• Defective or used batteries must be recycled in accor-
dance with Regulation (EU) 2023/1542.
• Hand in the battery and the battery charger at a recy-
cling centre. The plastic and metal parts used can be
separated by type and thus recycled.
• Dispose of batteries when discharged. We recom-
mend covering the poles with an adhesive strip to pro-
tect against a short circuit. Do not open the battery.
• Dispose of batteries in accordance with local regula-
tions. Return batteries to a used battery collection
point where they can be recycled in an environmental-
ly friendly manner. Ask your local waste disposal com-
pany about this.
Remedy
Charge the battery.
Push the battery into the battery mount. The
battery clicks into place audibly.
Push the direction of rotation switch to the left or
right.
Documentation authorised representative:
Georg Kohler
Günzburger Str. 69
D-89335 Ichenhausen
Ichenhausen, 02.06.2026
Simon Schunk
Division Manager Product Center
Andreas Pecher
Head of Project Management
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

5909299948

Inhaltsverzeichnis