Ordering Spare Parts; Service Information; Troubleshooting; Disposal And Recycling - Scheppach Wmp161-56 Originalbetriebsanleitung

NOTE
Important note in the case of repairs
When returning the product for repair, for safety rea-
sons, ensure that it is free of oil and fuel when it is
sent to the service centre.

18.1 Ordering spare parts

Please provide the following information when order-
ing spare parts:
• Model designation
• Item number
• Type plate data
Spare parts / accessories
Cutting thread - item number:

18.2 Service information

With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*: Cutting thread, V-belt, engine oil,
spark plug, air filter, wheels
* may not be included in the scope of delivery!

20. Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your product failing to work
properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault Possible cause
• Screws are loose
Unsteady running, strong
• Cutting line, cutting height adjustment loose
vibration of the device
• Cutting threads of unequal length
• Engine brake lever not pressed
• Spark plug is defective
• Fuel tank is empty
Engine does not run • Contaminated fuel
• cold environment
• Engine defective
• Air filter dirty
Engine runs unsteadily
• Spark plug dirty

19. Disposal and recycling

Notes for packaging
You can find out how to dispose of the disused de-
vice from your local authority or city administration.
Fuels and oils
• Before disposing of the device, the fuel tank and
• Fuel and engine oil do not belong in household
5911290002
• Empty oil and fuel tanks must be disposed of in an
www.scheppach.com
The packaging materials are recycla-
ble. Please dispose of packaging in
an environmentally friendly manner.
the motor oil tank must be emptied!
waste or drains, but must be collected or disposed
of separately!
environmentally friendly manner.
Remedy
• Check screws
• Check cutting height adjustment
• Check cutting threads
• Press engine brake lever
• Replace spark plug
• Refill with fuel
• Empty the fuel tank and fill with clean fuel
• Press the primer button
• Contact authorised customer service
• Clean the air filter
• Clean the spark plug
GB | 39