How To Stop Cooking; Flexible Cooking Zones - Pkm In 5-Fz Bedienungsanleitung

zone.
While using unsuitable cookware, the cooking zone does not heat up. The display
goes off automatically after 1 minute even if you have not placed suitable
cookware on the cooking zone.

3.5 How to stop cooking

1. Touch the
SELECTION OF COOKING ZONE
cooking zone you want to switch off.
2. Switch off the relevant cooking zone by setting the - senso
to 0. Check that the indicator displays 0 and then H.
3. Switch off the appliance with the O
4. Beware of the hot surfaces of the cooking zones! An H
indicates which cooking zones are still hot. The H
disappears as soon as the relevant cooking zone has cooled
down. You can use the
a new cooking procedure on a cooking zone which is stil
warm/hot.

3.6 Flexible cooking zones

You can place the cookware on any place within the defining lines of the flex-zones.
When activating the bridge-function, the cookware must have a minimum diameter
of 210 mm for optimum result.
1. Touch the
SELECTION OF COOKING ZONE
cooking zone which is intended for operating in flex-mode
The indicator flashes.
2. Touch the
SELECTION OF FLEX ZONE
mode is activated. The power level indicators of the front and back cooking zone
indicate the same power level.
-sensor of the
/O
N FF
H for saving energy when starting
- -sensor. The indicator flashes and the flex-
46
-sensor.
-sensor of the