Testing The Camera System; Operation - Cartrend 90106 Gebrauchsanweisung

Intertek Project Code: 489 5025 16 000 4 00451
WIRELESS CAMERA SYSTEM FOR VEHICLES
• Press the suction cap against the windscreen or
dashboard and push down the lever ( g. 11).
• Insert the monitor (1) into the joint of the
monitor arm (2).
You can freely adjust the viewing angle of the
•
monitor ( g. 11).

TESTING THE CAMERA SYSTEM

• Insert the 12V plug (4) of the monitor power cable into the cigarette lighter or a 12V power outlet.
• Turn the ignition to accessory position, do not start the vehicle.
• Engage parking brake and adjust gear to reverse gear.
• Press on/o (20) to switch on the monitor (1).
• You should see the image of the camera. If some monitor adjustment is needed, see chapter
Operation for how to adjust.
4

OPERATION

14 Display
15 Power LED
16 MENU
17 +
18 -
19 Guideline ON/OFF
20 Power on/o
• The monitor automatically turns on, when the vehicle is in reverse gear.
• The blue power LED (15) shows power on for the monitor.
• Use MENU (16) to activate the OSD menu for picture adjustment.
• Press + (17) or – (18) to choose BRIGHTNESS, CONTRAST, COLOUR or DIRECTION.
• Press MENU (16) after selecting BRIGHTNESS, CONTRAST, COLOUR or DIRECTION.
• Press MENU (16) for choosing direction. Change the image appearance with + (17) or – (18) to
change picture to upside down and left/right image.
Client: SPA Tested
Project: 90106 W/Cam
Language: GB
Figure 11
14 15
20
36
Date/ :
Version/ :
Page/ :
GB
16
17
18
19
02.05.2008
04
36 (of 92 Pages)