Safety Instructions - Cartrend 90106 Gebrauchsanweisung

Intertek Project Code: 489 5025 16 000 4 00451
WIRELESS CAMERA SYSTEM FOR VEHICLES
TABLE OF CONTENT
1 Safety instructions
2 Intended use
3 Installation
• Installation of the camera
• Electric installation
• Installing the monitor
• Testing the camera system
4 Operation
5 Cleaning, care and maintenance
6 Warranty
7 Disposal
8 Technical data
9 Declaration of conformity
1

SAFETY INSTRUCTIONS

Warning! Failure to follow all instructions listed below may result in electric
shock, re, serious injury and damage to property. Keep this manual somewhere
where you can access them whenever you or other persons need to.
• Always secure electrical cables rmly.
• Never use the cable for carrying or pulling the device. Damaged cables increase the risk of electric
shock.
• Always disconnect the device by pulling the 12V plug, but never by pulling the connection cable
itself.
• Arrange the cables in a way that they do not hinder the driver in operating the vehicle.
• Only unplug the appliances from the voltage source pulling on the plug, not by the cable.
• If cables are to be routed through sharp-edged walls, e.g. metal walls, use empty tubes or cables
ducts to avoid damaging the cables.
• Damaged cables must be replaced immediately.
• Route the electrical cable so that it is not possible to trip over them and to prevent them being
damaged.
Client: SPA Tested
Project: 90106 W/Cam
Language: GB
30
Date/ :
Version/ :
Page/ :
GB
30
32
32
32
33
35
36
36
37
37
37
37
37
02.05.2008
04
30 (of 92 Pages)