Intended Use; Installation; Installation Of The Camera - Cartrend 90106 Gebrauchsanweisung

Intertek Project Code: 489 5025 16 000 4 00451
WIRELESS CAMERA SYSTEM FOR VEHICLES
2

INTENDED USE

This camera system is intended for enhancing the safety while driving in reverse. Use only for short
driving in reverse, do not use for driving in reverse without taking other safety measures. This system
helps when parking the vehicle. It does not release you from your duty to drive carefully. Always drive
slowly while in reverse. Obey the local tra c regulations!
3

INSTALLATION

The installation instructions may not apply to all vehicle types, because of technical di erences, due to
manufacture side speci cations.

INSTALLATION OF THE CAMERA

The camera is prepared for mounting above or below the number plate. Use the supplied mounting
plates (5) for mounting the camera.
• Remove the rear number plate ( g. 1).
• Insert the mounting plates (5) and re t the number plate ( g. 2).
• Mount the camera (3) on the mounting plates (5) ( g. 3).
• Mount and align the camera (3) with the supplied plastic washers
(11), screws (10) and lock nuts (12) to the mounting plate (5)
( g. 4).
Client: SPA Tested
Project: 90106 W/Cam
Language: GB
10 11
32
Date/ :
Version/ :
Page/ :
GB
Figure 1
Figure 2
Figure 3
3 11 5 12
Figure 4
02.05.2008
04
32 (of 92 Pages)