Cartrend 90106 Gebrauchsanweisung Seite 34

Intertek Project Code: 489 5025 16 000 4 00451
WIRELESS CAMERA SYSTEM FOR VEHICLES
• The 12V + wire is a coloured wire. The negative wire is a black wire. If you are uncertain about the
wires, use a multimeter to determine the positive wire. Refer to the multimeter instructions for how
to test for positive wires.
• After the 12V + wire is found, turn o the vehicles ignition.
WARNING! Before beginning work on the circuitry, remove the negative cable
from the vehicle battery.
• Remove the bulb of the reverse light from the socket.
• Clip one wire connector (9) on the 12V + wire,
the other to the negative wire (black) ( g. 7).
• Then insert the corresponding wires of the
power cable (7) for the transmitter unit (6) to
the wire connectors (9) ( g. 8).
Client: SPA Tested
Project: 90106 W/Cam
Language: GB
Transmitter box
Power cable
Reverse lamp
Camera
Figure 6
34
+12V DC reverse lamp
Red
Wire clamp
Black
Ground
Figure 7
Figure 8
Date/ : 02.05.2008
Version/ : 04
Page/ : 34 (of 92 Pages)
GB