Technical Data - Bosch 3 603 K16 300 Originalbetriebsanleitung

Technical Data

Digital Laser Rangefinder
Article number
Measuring range
Measuring accuracy (typically)
Lowest indication unit
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter (at 25 °C) and
at 10 m distance, approx.
Batteries
Rechargeable batteries
Battery live, approximately
– Individual measurements
– Continuous measurement
Weight according to
EPTA-Procedure 01/2003
Dimensions
Degree of protection
(excluding battery compartment)
A) The working range increases depending on how well the laser light is
reflected from the surface of the target (scattered, not reflective) and
with increased brightness of the laser point to the ambient light intensity
(interior spaces, twilight). In unfavourable conditions (e.g. when meas-
uring outdoors at intense sunlight), it may be necessary to use the target
plate.
B) In unfavourable conditions (e.g. at intense sunlight or an insufficiently
reflecting surface), the maximum deviation is
able conditions, a deviation influence of
account.
C) In the continuous measurement function, the maximum operating
temperature is +40 °C.
D) Fewer measurements are possible when using 1.2 V rechargeable
batteries as compared with 1.5 V batteries.
Please observe the article number on the type plate of your measuring
tool. The trade names of the individual measuring tools may vary.
The measuring tool can be clearly identified with the serial number 21
on the type plate.
Bosch Power Tools
3 603 K16 300
– 10 °C ... +50 °C
– 20 °C ... +70 °C
635 nm, <1 mW
4 x 1.5 V LR03 (AAA)
4 x 1.2 V HR03 (AAA)
58 x 104 x 36 mm
IP 54 (dust and splash
water protected)
±
10 mm per 50 m. In favour-
±
0.05 mm/m must be taken into
2 609 140 621 | (25.6.09)
English | 25
PLR 50
A)
0.05–50 m
B)
±2.0 mm
1 mm
C)
90 %
2
6 mm
D)
30000
D)
5 h
0.18 kg