VEVOR LK-10A Bedienungsanleitung

CABLE CUTTER
Model:LK-10A
This is the original instruction, please read all
manual instructions carefully before operating.
VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be
subject to the product you received. Please forgive
us that we won't inform you again if there are any
technology or software updates on our product.
01
Warning-To reduce the risk of injury, user must
read instructions manual carefully.
This product is subject to the provision of Europe-
an Directive 2012/19/EC. The symbol showing a
wheelie bin crossed through indicates that the
product requires separate refuse collection in the
European Union. This applies to the product and
all accessories marked with this symbol. Products
marked as such may not be discarded with normal
domestic waste, but must be taken to a collection
point for recycling electrical and electronic devices
WARNING!
1. Before using this product, please read instruc-
tions carefully and understand the specifications.
2. Disconnect power supply before working if cut
wiring .
3. Inspect before every use; do not use if dam-
aged. If they are loose, tighten them in time to
avoid damage to the cutting edge;
4. Keep away from children.
5. When using this product, be sure to wear
personal protective equipment such as protective
gloves and goggles to prevent accidental injury.
6. When using this product, pay attention to keep
the jaws clean and lubricated to prolong the
service life.
7. Do not use this product for Object being cut
beyond its range.
8. When using this product, do not put your
fingers or other objects into the jaws to avoid
injury.
9. Please don't use bolt cutter head instead of a
hammer to strike.
02
RATCHETING CABLE CUTTER
1.Cutting for CU/AL cables
2.Convenient quick release lever
3.Save labor with ratchet design
4.Cutting easily with forging blade
Model No. Cutting Range
LK-10A 70mm2 (AWG 138MCM)Max. Cu/Al cable
Forging pliers body
PVC handle
03