Seca 701 Bedienungsanleitung Seite 23

Automatic switch-off/economy mode
The scale automatically detects whether it is being operated on rechargeable batteries
alone or whether it is connected to the mains.
– With rechargeable battery operation: automatic shut-down after 30 seconds.
– With mains operation: shut-down only via keypad.
Mother-and-baby function
The body weight of babies and small children can be determined with the aid of the moth-
er-and-baby function. The child is held in the arms of an adult to do so. Proceed as fol-
lows:
– Press the green Start key.
0. 0 0
– Wait until appears in the display.
– Stand on the scale without the child.
You can read the weight off the digital
display.
– Activate the mother-and-baby function
by depressing and holding the HOLD/
2 in 1 key.
The scale stores the weight of the adult
and the display returns to zero.
pears in the display and the NET light
comes on.
– Now take the child onto the scale. You
can get off the scale to do so, in which
----
case appears.
The scale determines the weight of the
child. Once the value is stable for about
3 seconds, the display is held. This pre-
vents the display from continually jump-
ing about as the child moves. "HOLD"
and an arrow pointing to the mother-
and-baby symbol also appear in the dis-
play. The triangle with the exclamation
mark indicates that this frozen display is
an additional facility which is not subject
to calibration.
You can now perform as many weigh-
ing operations with different children as
you want to.
It is important that it is always the same adult who carries out the measurement
and that this person's weight does not alter (e.g. as a result of removing an item
of clothing).
The mother-and-baby function stays on until
– you press the HOLD/2 in 1 key (total weight is displayed),
– you press the Start key or
– the scale switches off automatically.
Model 701
0. 0 0
ap-
GB
23