Product Description And Specifications - Bosch PTA 2400 Originalbetriebsanleitung

OBJ_BUCH-940-005.book Page 13 Tuesday, January 10, 2017 3:00 PM
Symbols
The following symbols can be important for the operation of
your saw stand. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the saw stand better and more secure.
Symbol Meaning
The maximum carrying capacity (power tool
+ workpiece) of the saw stand is 160 kg.
160
kg
Product Description and
Specifications
Intended Use
The saw stand is intended exclusively for mounting the
following stationary Bosch saws (as of 2011.06):
– PCM 7 3 603 M01 2..
– PCM 7 S 3 603 M01 3..
– PCM 8 S 3 603 L02 0..
– PCM 10 3 603 L01 0..
Together with the power tool, the saw stand is intended for
the cutting to length of boards and profiles.
Product Features
The numbering of the product features refers to the illustra-
tion of the saw stand on the graphics pages.
1 Attachment set
2 Retaining adapter
3 Locking pin of the saw stand legs
4 Height-adjustable leg
5 Locking knob of the attachment set 1
6 Material stop
7 Locking knob of the length stop 6
8 Workpiece support
9 Locking knob of the workpiece support 8
10 Table extension
11 Locking pin of the table extension 10
12 Fastening kit, retaining adapter
13 Fastening kit, power tool
14 Lock nut
15 Fastening hole
16 Assembly-sliding plate
17 Locking knob of the table extension 10
18 Adjustment screw of the attachment set 1
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Bosch Power Tools
Technical Data
Saw stand
Article number
Length of saw stand without table
extension
Length of saw stand with table
extension
Height of saw stand
Max. carrying capacity
(power tool + workpiece)
without table extension
– Attachment set
Max. carrying capacity
(power tool + workpiece)
with table extension
– Attachment set
– Per table extension
Weight according to
EPTA-Procedure 01:2014
Assembly
Delivery Scope
Please also observe the representation of
the delivery scope at the beginning of the
operating instructions.
Before assembling the saw stand, check if all parts listed
below are provided:
No. Designation
Saw stand PTA 2400
1
Attachment set
5 Locking knob of the attachment set 1
2
Retaining adapter
12
Retaining adapter fastening kit
consisting of:
– Assembly-sliding plate
– Hexagon bolt (M8 x 15)
– Washer
8
Workpiece support
6
Length stop
7
Locking knob of the length stop
Carriage bolt (M6 x 46)
13
Power tool fastening kit
consisting of:
– Hexagon bolt (M8 x 50)
– Washer
– Wing nut
English | 13
PTA 2400
3 603 M05 0..
mm 1220
mm 2440
mm 820
kg 160
kg 110
kg 25
kg 20.4
Quantity
1
2
2
2
4
4
4
2
2
2
2
4
8
4
1 609 92A 1M9 | (10.1.17)