English; Safety Notes; Product Description And Specifications; Technical Data - Bosch GTA 600 Professional Originalbetriebsanleitung

OBJ_BUCH-1382-002.book Page 8 Thursday, January 12, 2017 9:50 AM

8 | English

English

Safety Notes

General Safety Rules
Safety Warnings for Saw Stands
 Pull the plug from the mains receptacle and/or remove
the battery from the power tool before making adjust-
ments on the tool or changing tool accessories. Un-
intentional switching on of the power tool is the cause of
many accidents.
 Assemble the saw stand in the proper manner before
mounting the power tool. Proper assembly is important
to prevent the risk of a collapse of the saw stand.
 Attach the power tool securely to the saw stand before
using it. Slipping off of the power tool on the saw stand
can lead to loss of control.
 Place the saw stand on a firm, level and horizontal sur-
face. If the saw stand can slip off or wobble, the workpiece
cannot be uniformly and securely guided.
 Do not overload the saw stand and do not use it as a
ladder or scaffolding. Overloading or standing on the saw
stand can lead to the upward shifting of the centre of
gravity of the stand and its tipping over.
 Do not ram the workpiece with force into the saw
blade. When too much force is applied when using the
power tool, the saw stand can be tipped over.
 When working, take care that all bolts and connecting
elements are firmly tightened. Loose connections can
lead to instability and inexact sawing.
 Ensure that long and heavy workpieces do not affect
the equilibrium of the saw stand. Long and/or heavy
workpieces must be supported at the free end.
 Keep your fingers clear of the hinge points while push-
ing the saw stand together or pulling it apart. Danger of
fingers being crushed or contused.
 Observe valid national and international standards.
1 609 92A 3AJ | (12.1.17)
Downloaded from www.Manualslib.com
Read all warning notes and instructions en-
closed with the saw stand and the power
tool to be mounted. Failure to follow the
warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
manuals search engine
Symbols
The following symbols can be important for the operation of
your saw stand. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the saw stand better and more secure.
Symbol Meaning
The maximum carrying capacity
(power tool + workpiece) of the saw stand
is 60 kg.
Product Description and
Specifications
Intended Use
The saw stand is intended to accommodate the following
stationary saws from Bosch (as of 2011.01):
– GTS 10 J 3 601 M30 5..
Together with the power tool, the saw stand is intended for
the cutting to length of boards and profiles.
Product Features
The numbering of the product features refers to the illustra-
tion of the saw stand on the graphics pages.
1 Tension latch
2 Retaining clamp
3 Base frame
4 Saw stand leg
5 Fastening kit
6 Housing frame (GTS 10 J)
7 Strike (GTS 10 J)
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.

Technical Data

Saw stand
Article number
Dimensions of base frame
Height of saw stand
Max. carrying capacity
(power tool + workpiece)
Weight according to
EPTA-Procedure 01:2014
Assembly
Delivery Scope
Please also observe the representation of
the delivery scope at the beginning of the op-
erating instructions.
GTA 600
3 601 M22 001
mm 450 x 520
mm 602
kg 60
kg 6.3
Bosch Power Tools