Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GTA 2500 Compact Professional Originalbetriebsanleitung

OBJ_BUCH-1463-002.book Page 11 Thursday, August 16, 2012 10:02 AM
Attach the power tool securely to the saw stand before
using it. Slipping off of the power tool on the saw stand
can lead to loss of control.
Place the saw stand on a firm, level and horizontal sur-
face. If the saw stand can slip off or wobbles, the power
tool or the workpiece cannot be uniformly and securely
guided.
Do not overload the saw stand and do not use it as a lad-
der or scaffolding. Overloading or standing on the saw
stand can lead to the upward shifting of the centre of grav-
ity of the stand and its tipping over.
When working or transporting, take care that all bolts
and connecting elements are firmly tightened. The at-
tachment sets for the power tool must always be firmly
locked. Loose connections can lead to instability and inex-
act sawing.
Mount and dismount the power tool only when it is in
the transport position (for instructions on the trans-
port position, also see the operating instructions of the
respective power tool). Otherwise, the power tool can
have such an unfavourable centre of gravity that it cannot
be held securely.
When the power tool is mounted to the attachment set,
operate it exclusively on the saw stand. Without the saw
stand, the attachment set with the power tool does not
stand securely and can tip over.
Ensure that long and heavy workpieces do not affect
the equilibrium of the saw stand. Long and/or heavy
workpieces must be supported at the free end.
Keep your fingers clear of the hinge points while push-
ing the saw stand together or pulling it apart. Danger of
fingers being crushed or contused.
Symbols
The following symbols can be important for the operation of
your saw stand. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the saw stand better and more secure.
Symbol Meaning
The maximum carrying capacity (power
tool + workpiece) of the saw stand is
250
250 kg.
kg

Product Description and Specifications

Intended Use

The saw stand is intended to accommodate the following sta-
tionary saws from Bosch (as of 2012.08):
– GCM 8 S 3 601 L16 0..
– GCM 8 SJ 3 601 L16 2..
– GCM 800 S 3 601 L16 1..
– GCM 10 0 601 B20 0..
Bosch Power Tools
– GCM 10 J 3 601 M20 2..
GCM 10 M
– GCM 10 S 0 601 B20 5..
– GCM 10 SD 0 601 B22 5..
– GCM 12 0 601 B21 0..
– GCM 12 GDL 3 601 M23 6..
– GCM 12 SD 0 601 B23 5..
– GTM 12 3 601 M15 0..
Selected chop and mitre saws from other manufacturers can
also be mounted.
Together with the power tool, the saw stand is intended for
the cutting to length of boards and profiles.

Product Features

The numbering of the product features refers to the illustra-
tion of the saw stand on the graphics pages.
1 Workpiece support
2 Locking knob of the workpiece support 1
3 Table extension
4 Material stop
5 Attachment set
6 Roller stand
7 Locking knob of the table extension 3
8 Height-adjustable leg
9 Carrying handle
10 Open-end spanner (13 mm)
11 Locking pin
12 Button for releasing lever 13
13 Lever for locking the attachment set
14 Movable nut
15 Fastening kit, power tool
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.

Technical Data

Saw stand
Article number
Length of saw stand without table
extension
Length of saw stand with table ex-
tension
Height of saw stand
Max. carrying capacity
(power tool + workpiece)
without table extension
– Attachment set
Max. carrying capacity
(power tool + workpiece)
with table extension
– Attachment set
– Per table extension
Weight according to
EPTA-Procedure 01/2003
English | 11
GTA 2500 Compact
3 601 M12 400
mm 1050
mm 2500
mm 862
kg 250
kg 150
kg 50
kg 15.8
1 619 929 J05 | (16.8.12)