Malfunctions; Care & Maintenance - kiwy S23 Gebrauchsanleitung

So, always follow the check list above before starting any journey with
the car seat fitted in your vehicle.
Always check that the vehicle's seat belt is correctly positioned before
placing your child in the S 23 child seat.
Warning:
Any child seat tightly fixed on the vehicle seat may leave signs, due to
the measures to be adopted in compliance with the Safety Standards.
This seat is designed to minimize this phenomenon. The manufacturer is
not liable for possible signs resulting from the normal use of this seat.
VI. Malfunctions
In case of incidental dropping or any evident damage, your child seat
must be inspected by the manufacturer.
Any malfunction of the harness may endanger your child protection.
In case of buckle malfunction, do not use this seat and consult your
retailer.
VII. Care & maintenance instructions
Warning: Never lubricate any component of your child seat, just keep it
nice and clean.
. Plastic parts can be easily cleaned by using just soapy water; never use
solvents, alcohol or any harsh cleaning agents.
. Cleaning: when your cover gets dirty, remove it (see below) and hand-
wash it at 30°; do not use chemical cleaners; do not machine-wash; do
not wring, nor tumble-dry; do not iron. Please observe the instructions
on its washing label.
Removing the fabric cover:
Release the cover from the four buttons located at the rear of the
backrest (Fig. 13).
To remove the seat cover stretches the lower elastic edge and removes
the cover by sliding it over the armrests.
8