clage Zip HydroTap G4 B 160 Gebrauchsanleitung Seite 27

LCD Screen operation - Section C
IV. Booster
This function should only be considered when a Booster unit is
installed.
Note: Failing to make the correct selection for 'Booster' will eff ect
product performance.
V. Lux Sensor Calibration
Note: Perform calibration under normal light conditions
LCD Screen operation - Section D
D Service
Caution must be observed when changing any settings
within the Service Menu as any changes may aff ect the
normal operation of the unit. This can only be done by a
technician. Please contact the Clage after sales service for further
assistance.
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Booster] button.
4. In the next screen, press but-
A
ton to enable the Booster.
5. Dispense hot water for 30 secs
and check the outlet hose
from the Booster is warm.
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Lux Sensor Calibra-
tion] button.
4. The lights on the tap head will
fl ash to confi rm calibration.
1. Press the [MENU] button for
main menu.
2. Press the [Service] button.
3. A password is required to enter
service menu.
27