clage Zip HydroTap G4 B 160 Gebrauchsanleitung Seite 21

Tap LED's
Red Hot Water LED
Red LED
On all the time
This indicates that the hot water is
ready.
Flashing slowly
This indicates that the temperature of
hot water is not within the set range.
When the hot water is at the set tem-
perature, the light will stop flashing.
This could take several minutes.
The flashing light will typically occur
after switching on, during heavy us-
age or coming out of sleep mode.
White Filter LED
White filter LED
White filter LED off
This indicates the filter is operating
within its normal specified lifespan.
White filter LED flashing slowly
The light will flash slowly when the
filter is due for replacement and the
LCD will show "Filter Change". Refer
to chapter "Replacing the filter".
21