Troubleshooting - auna 10008978 Bedienungsanleitung

Speaker connection: Speaker connection:
1. Select audio source by pressing the INPUT key on the front panel or the DVD,AUX,CD,BLUETOOTH
on the remote control.
2. Adjust the knob VOLUME on the front panel or the key VOL+/- on the remote control to adjust
the setting of the main volume control to your listening level.
3. Press the TREBLE key on the front panel to increase or decrease music treble eff ect. Press the
BASS key on the front panel to increase or decrease music bass eff ect. Press the BALANCE key on
the front panel to increase or decrease music balance eff ect. 4.Press the MUTE key on the remote
control to mute, press it again to reset.
• Turn off any Bluetooth devices previously paired (linked) with this unit.
• Turn on the Bluetooth features on your phone or music player.
• Turn on and set this unit in the Bluetooth mode.
• Set your phone or music players to search for Bluetooth devices.
• Select CD508-BT from search results on your phone or music player.
• Select OK or Yes to pair this unit with your phone or music player.
• If protected, enter 0000 for passkey.
Problem
The display does not light and there
is no output sound.
Display lights but sound is not
produced
No sound from Centre channel.
Normal function
BT Pair & Connection

Troubleshooting

Possible Cause
Power cord not plugged in
securely.
Speaker connections not secure
Volume control at minimum level
Speaker connections not secure
Centre channel volume set to
minimum.
Suggested Solution
Check power cord &
plug connection.
Connect securely
Turn volume up
Connect securely Adjust Centre
channel volume control.
9