Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
between you and other members in the same group, you can use this function to find out
CTCSS or DCS frequencies.
•
When the transceiver is in receiving, press
•
Press MENU to enter, the arrowhead points to "CTCSS". Press UP / DOWN select
to scan CTCSS or DCS.
•
And then press MENU to confirm, it starts scanning CTCSS/DCS frequencies.
NOTE:
This function can not work under the channel mode.
The function can not start up if there is no signal on the frequency.
Press UP / DOWN or turn code switch to reverse the scanning direction.
When identifying CTCSS or DCS frequencies, the identified frequency will displayed on the
screen. In this moment, you can press MENU instead of present CTCS or DCS frequencies
temporarily. If you need direct replacement, please enter CTCSS menu (Menu 15 & Menu 16)
or DCS menu (Menu 17& Menu 18) to save and confirm.
Otherwise, the value will come back to the prior one after restoration.
Only when the radio is receiving a signal, the transceiver can enter CTCSS/DCS frequency to
scan.
DTMF Encoding
MENU , UP, DOWN , EXIT keys are corresponding to A, B, C, D on DTMF
Please follow the below steps to dial up manually:
•
Press PTT key to transmit.
•
During transmission, press the DTMF key, and the corresponding DTMF tone is sent
out.
NOTE: The transceiver transmits the corresponding tone, which can be monitored by the
speaker.
ANI ID Code Edit, ANI ID Code Transmit, ANI ID Code
Transmit Delay and Setting DTMF Sidetone
NOTE: The above functions in this transceiver only can be edited by our PC programming
software.
ANI ID Code Edit
ANI ID Code can be edited by 6 digits, which is made up of A, B, C, D and 0-9.
ANI ID Code Transmit
Switch of ANI ID Code Transmit means that when you are communicating, press [PTT] key
every time, the ANI ID CODE will be auto or manual transmitted. Selecting ON means
automatically transmit, OFF means manually transmit.
ANI ID Code Transmit Delay
ANI ID Code Transmit Delay means when you are communicating, press [PTT] key every
time to delay transmit ANI ID Code automatically.
The longest time of ANI ID Code auto transmit delay is 3seconds, which is divided into 30
levels and 100ms per level.
Setting DTMF Sidetone
DTMF sidetone gives you the opportunity to switch on or off the speaker and hear the relative
DTMF tone when transmit DTMF.
MENU + 23 , the screen displays
Werbung
Inhaltsverzeichnis
