Beurer AS 50 Gebrauchsanleitung Seite 30

The activity sensor provides the best measuring results when at-
tached to your belt or trouser waistband.
Why does nothing happen when you press the buttons?
Is a key shown on the display?
If yes, you have activated the key lock. Press the
for approx. 5 seconds to deactivate the key lock. The buttons are
now reactivated.
Check the state of the battery!
If the battery is dead, then no display is possible. Insert a new bat-
tery (see chapter "Insert battery/Change battery").
Why is nothing shown on the display?
Check the state of the battery!
If the battery is dead, then no display is possible. Insert a new bat-
tery (see chapter "Insert battery/Change battery").
Check whether the battery has been inserted properly!
If not, insert the battery again (see chapter "Insert battery/Change
battery").
: If the contact is incorrect, the device can be damaged
Please note
and it can possibly no longer work.
Why are my paces not recorded correctly?
Set the sensitivity of the device to your personal pace sequence
(see chapter "Recording the activity", section "Setting the sensitiv-
ity of the device for pace counting").
Check the state of the battery!
If the battery is dead, then the device cannot measure correctly.
Insert a new battery (see chapter "Insert battery/Change battery").
Why can't I download my data from the activity sensor?
Check cable attachment to the mini-USB. If the cable is not inserted
properly, then no connection can be made.
28
button