Beurer AS 50 Gebrauchsanleitung Seite 13

3 Put the lid of the battery compartment into
the battery compartment so that it is flush
with the casing.
Pay attention that the arrow on the lid and
the arrow on the casing point against each
other.
4 To guarantee continued impermeability,
tighten the lid clockwise with the coin until it
stops.
Caution! Do not continue to turn
the lid, if it cannot be turned into
the battery compartment without
resistance. Repeat the process
after changing the position of the
lid. The catch mechanism could
be damaged otherwise.
5
Your activity sensor switches automatically
into the setting menu.
Attaching the activity sensor
There are various possibilities to wear the activity sensor: on your
belt/trouser waistband (recommended wearing method), in your trou-
ser pocket or as a wristwatch.
Pay attention to adjust the sensitivity of the device differently
depending on how it is attached. We recommend wearing the
activity sensor on your belt to get the most accurate results of
the device as possible!
11
G
B