Device Pairing - Stiga Cgf Li 56 Gebrauchsanweisung

in the required fields. The registration procedure
requires an email verification.
User action
Open and follow STIGA.
GO app setup
Press and hold for 10
sec the WiFi button
Follow STIGA.GO app setup to:
1. connect to the net
2. change net
3. change net password
Confirm operation
NOTE If the charger is not detected by the mobile device, make sure it is not paired with another device
NOTE If the charger has been successfully paired, the indicator light on the charging base will lit up with
a steady light. If pairing has not been completed, the indicator light flashes.
The "Device Pairing" section allows users to
pair their mobile device with the charger via a
Bluetooth® connection.
To add the STIGA charger, follow the instructions
in the table:
Charger action
• Light off if charger is power-off; light
off if WiFi not configured
• Light on (blu color) if charger is
power-on
• Light on (red color) if error in
connection or no connection
Entering in setup mode
Still in setup mode
Setup done
WiFi active
EN - 4

10.3 DEVICE PAIRING

LED status
Pulsating blue LED light
(once in setup mode)
Pulsating blue LED light
(still in setup mode)
Led blu blink 5 time
Solid blu led