Package List; Typical Installation - Vevor T5 Bedienungsanleitung

PACKAGE LIST

No.
1
2
3
4 Mounting Hole Guiding Sticker
5

Typical installation:

The typical shower wall surround may be a 2x4 wood stud frame, covered
with gypsum drywall, tile board or plaster. The shower wall finish is usually
ceramic tile. These materials alone are not adequate to support the fold
down seat unless you can mount it into existing wood blocking or wall
studs. You can use a 1/8th-inch masonry bit,drill through the tile grout to
determine if studs are in place.
Strong wall support is required
Installation of the wall mounted folding shower seat requires wood blocking
in a typical stud wall. We suggest installing continuous 2x12 wood blocking
between the studs, starting from the floor plate up to at least 24 inches
above the shower floor. Remodeling an existing shower can be more
involved. If the shower backs up to an interior wall, consider removing the
wallboard and installing the blocking from the backside. If not, it may be
required to remove and replace a portion of the existing shower wall tile.
Name
Shower Seat
Wall Expansion Anchor
Phillips Screw(ST5.8x60)
Manual
Picture
3
QTY
1
6
6
1
1