BabyGo COZY RIDER Bedienungsanleitung Seite 16

CANOPY
30
3.
To remove the
wagon fabric:
- Unfasten d-rings
from fabric loops.
- Pull apart velcro
loops to detach.
1.
To attach the canopy:
- Locate posts on each side of the canopy.
- Slide the canopy posts into side housing on the
seat backs.
- Canopy is extandable and offers UPF 50+ protection.
2.
To remove the canopy: Pull both sides of the
canopy posts until the canopy fully releases from
housings.
3.
Use: Pull forward to use canopy; push backwards
to retract.
4.
To open the peek-a-boo window:
- Pull upwards on the window flap until it is fully
opened.
- To secure the position, roll up the window flap and
loop the toggle through the elastic cord to keep it in
place.
TRAY & CUPHOLDER
1.
To attach the tray:
- Assemble the tray by attaching the 2 vertical posts to
each side of the tray.
- Locate tray attachment points on frame. If there are
caps on the attachment points, remove and store
them away.
- Insert the tray posts at attachment points until CLICK
is hear.
2.
To remove the tray: Press on the buttons located
on side posts and pull to release the tray.
3.
To attach cupholder:
- Slide the cupholder into attachment points
located on the handle bar.
- Push the cup holder in a downward motion to
secure in place.
- Push the cup holder in a downward motion to
secure in place.
To attach cupholder:
COZY RIDER
DE
EN
FR
NL
31