Front Wheels; Rear Wheels - Babygo Cozy Rider Bedienungsanleitung

FENDERS

REAR WHEELS

INHOUD
INHOUD
28
1.
For ease of installation, fenders are
interchangeable for left and right sides.
To attach fenders:
- Slot each fender into a wheel of arch.
- Ensure that the bottom of the fender locks
securely into the open slot in the rear axel
mount. You will hear a CLICK when fender is
secured in place.
2.
To remove fender: Pull fenders in an upward
direction until fender detaches from rear axle
mount.
1.
To attach rear wheels: Push the rear wheel post
into the rear wheel housing until CLICK is hear.
Repeat on the opposite side.
2.
To remove the rear wheels: Press the button
located below wheel housing and pull the wheel
outward until it is released. Repeat on oppisite side.

FRONT WHEELS

1.
To attach front swivel wheels: Push the front
wheel post into the front whel housing until CLICK
is heard. Repeat on the opposite sude.
2.
To remove front swivel wheels: Press the button
located below wheel housing and pull the wheel
outward until it is released. Repeat on opposite side.
WAGON FABRIC
1.
To attach your wagon seat to the frame:
- Locate the 4 velcro loops at the base of the wagon
seat (2 loops in the rear & 2 loops in de front).
- Loop and secure the velcro loops around the
frame base.
- There will be 2 velcro loops that will need to loop
through slots that are part of the bonus storage area.
2.
After securing the velcro loops:
- Locate the 8 d-rings on the wagon seat.
- Loop the webbing straps aroung the front and
rear seat backs.
- Loop the webbing straps aroung the side interiors
of the seat backs.
- Fasten the d-rings to the fabric loops.
COZY RIDER
DE
EN
FR
NL
29