Hints And Tips; Care And Cleaning - Aeg Tr98B64C Benutzerinformation

11.15 Possible causes of
unsatisfactory drying results:
• The filter is clogged. Clogged filter makes
drying inefficient.
• The airflow slots are clogged.
• The drum is dirty.
• Inadequate default dryness level settings.
Adjustment of the target final
See chapter
moisture

12. HINTS AND TIPS

12.1 Ecological hints
Loading the drum up to the maximum
capacity indicated for the respective
programmes will contribute to the energy
saving.
• Spin the laundry well before drying.
• Do not exceed the load sizes which are
specified in the programmes chapter.
• Clean the filter after each drying cycle.
• Do not use fabric softener to wash and
then dry. In the tumble dryer laundry
becomes soft automatically.

13. CARE AND CLEANING

13.1 Periodic cleaning schedule
Periodic cleaning helps to extend the life
of your appliance.
Indicative periodic cleaning schedule:
Cleaning the filter
Empty the water container
Cleaning the condenser
Cleaning the drum
Cleaning the control panel and housing
Cleaning the airflow slots
Table title
The following paragraphs explain how you should clean each part.
• Room temperature is too low or too high.
Optimal room temperature is between
18°-25°C.
• The water from the water container can be
used to iron the clothes. You must first
filter the water to eliminate remaining
textile fibres (simple coffee filter is
suitable).
• Always keep the airflow slots at the bottom
of the appliance clear.
• Make sure there is good airflow where the
appliance is to be installed.
If the appliance is not used for a long time
unplug the appliance.
When the indicator flashes
When the indicator flashes
When the indicator
Every two months
Every two months
Every two months
flashes
ENGLISH 25