cecotec LONGFLEX 710 PRO Bedienungsanleitung Seite 8

ENGLISH
d. Do not misuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock. The
application of a differential fuse reduces the risk of
exposure to electric shock.
Personal safety
a. Stay alert, watch what you are doing and use
commonsense when operating a power tool. Do not
use the power tool if you are tired, or after consuming
drugs, alcohol or medication. Failure to be attentive while
operating the power tool can result in serious injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety footwear, helmet or hearing protection, used
under appropriate conditions, will reduce personal injuries.
c. Avoid unintentional start-up. Make sure that the power
tool is switched off before connecting it to the mains and/
or when mounting the battery pack, picking it up and
transporting it. If you transport the power tool by holding it
by the on/off switch, or if you power the power tool while
it is switched on, this may result in an accident. Remove
adjusting tools or fixed wrenches before connecting the
power tool. An adjusting tool or wrench placed on a rotating
part can cause injury when operating the power tool.
14
LONGFLEX 710 PRO ORIGINAL INSTRUCTIONS
d. Avoid risky postures. Keep proper footing and balance at
all times. This will allow you to better control the power
tool in the event of an unexpected situation.
e. Wear appropriate work clothing. Do not wear loose
clothing or jewelry. Keep your hair and clothing away from
moving parts. Loose clothing, long hair and jewelry can
catch on moving parts.
f. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. The use of this equipment
reduces the risks derived from dust.
g. Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
principles. A careless action can cause serious injury within
a fraction of a second.
Power tool use and maintenance
a. Do not overload the power tool. Use the correct power
tool for your application. With the right power tool you can
work better and safer within the specified power range.
b. Do not use the power tool if the switch is faulty. Power
tools that cannot be connected or disconnected are
dangerous and must be repaired.
c. Disconnect the mains plug and/or remove the detachable
battery from the power tool before making any
adjustments, changing accessories or storing the power
tool. Such preventive safety measures reduce the risk of
the power tool starting up accidentally.
d. Keep unused power tools out of the reach of children. Do
not allow persons who are unfamiliar with the power tool
or who have not read these instructions to use it. Power
tools used by inexperienced persons are dangerous.
ORIGINAL INSTRUCTIONS
ENGLISH
15
LONGFLEX 710 PRO