Setting The Alarm - oneConcept 10006663 Handbuch

SETTING THE WAKE UP TIME
1. Press and hold the AL SET BUTTON and repeatedly press the HOUR BUTTON to set the
correct wake up Hour.
2. Press and hold the AL SET BUTTON and repeatedly press the MINUTE BUTTON to set the
correct wake up Minute.
Note: There is a PM INDICATOR located in the left-hand side of the clock display. Be sure
to observe the PM indicator when setting the alarm to make sure the alarm time is set cor-
rectly for AM or PM. If the PM indicator appears in LCD DISPLAY, the alarm will be „PM". If
not, the alarm time will be „AM".
TURNING ALARM FUNCTION ON/OFF
1. Press the AL.ON/OFF Button once to turn the alarm function on. The ALARM INDICATOR,
" " will appear in the DISPLAY.
2. Press the AL.ON/OFF Button again to turn the alarm function off. The ALARM INDICA-
TOR, " " will disappear in the DISPLAY.
CHECKING THE WAKE UP TIME
Whenever you want to check the wake up time, simply press the AL SET BUTTON. The dis-
play will change from current time to wake up time. Release the AL SET BUTTON to return
to current time.
WAKE TO RADIO
1. Press the POWER BUTTON to turn on the System. The LCD DISPLAY lights up.
2. Press the AL.ON/OFF Button once to turn on the alarm function. The ALARM INDICATOR
will light up.
3. Slide the FUNCTION SELECTOR to "RADIO" and the BAND SELECTOR to AM, FM or FM
ST as desired.
4. Tune to your desired station, and adjust the volume level that you wish to hear when the
wake up time is reached then press the POWER BUTTON again to turn off the System.
Reconfirm the wake up time setting by tapping the AL SET BUTTON.
5. At the selected wake up time the radio will turn ‚On' and remain 'On' until it is turned off.
6. If you do not want the alarm to turn the radio on the following day, press the AL.ON/OFF
Button again to turn off the alarm function. The ALARM INDICATOR
16

Setting the Alarm

goes off.