Audio In; Setting The Clock (Remote Control Only) - oneConcept V-13 Bedienungsanleitung

EN
26

AUDIO IN

• Use a connection lead to connect the portable audio player etc. to the
AUDIO IN socket. When using video equipment, connect the audio output
to this unit and the video output to a television.
• Press the ON/STAND-BY button to turn the power on.
• Press the SOURCE button on the remote control or SOURCE button
repeatedly on main unit to select AUDIO IN function.
• Play the connected equipment. If volume level of the connected device
is too high, sound distortion may occur. Should this happen, lower the
volume of the connected device. If volume level is too low, increase the
volume of the connected device.
Note: To prevent noise interference, place the unit away from the
television.

SETTING THE CLOCK (REMOTE CONTROL ONLY)

• Press the ON/STAND-BY button to turn the power off.
• Press the CLOCK/TIMER button 2 seconds, to adjust the day.
• Press / to choose 12h / 24h display format and confirm with
CLOCK/TIMER.
24-hour display: (0:00 - 23:59)
12-hour display (AM 00:00 - PM 11:59)
• To set the hour, use
• Repeat, to set the minutes.
/ , then press CLOCK/TIMER.