Intended Use; Technical Description; Installing The Seat Heater - Waeco MagicComfort MSH300 Montage- Und Bedienungsanleitung

Intended use

4 Intended use
The MagicComfort seat heating MSH300 (item no. 9101700034) and
MSH301 (item no. 9101700035) are suitable for installation in the front
vehicle seats of passenger vehicles, transporters and caravans.
A
NOTICE!
For vehicles equipped with side airbags in the seat backrests,
seat occupancy detection or child seat detection, observe the
vehicle manufacturer's specifications.
5

Technical description

The heating elements for the MagicComfort seat heating MSH 300 and
MagicComfort MSH 301 can be installed in the driver's seat and in the
passenger seat.
The shape of the seat is not altered by the heating elements.
The seat heater is operated using a switch.
6

Installing the seat heater

6.1 Tools required (fig. 1, page 2)
For installation and assembly you will need the following tools:
 Drill bit set (1)
 Drill (2)
 Screwdriver (3)
 Set of ring or open-ended spanners (4)
 Measuring ruler (5)
 Hammer (6)
 Centre punch (7)
24
MagicComfort MSH300, MSH301
EN