Scope Of Delivery; Intended Use - Waeco MagicComfort MSH200 Montage- Und Bedienungsanleitung

Scope of delivery

Observe the following instructions when using the seat heater:
 Do not place any sharp or heavy objects on the seat, as the seat heater
could otherwise be damaged.
 Persons with an impaired sensitivity to heat should only operate the seat
heater at level I.
 Do not place any heat insulating objects, such as blankets or coats, on the
seat when the seat heater is switched on.
 The seat heater can be damaged by fluids spilt on the seat.
 Never switch the seat heater on when it is wet.
3
No. in fig. 4,
page 3
4
The MagicComfort MSH200 (item no. 9101700020) seat heater is suitable
for fitting in the front vehicle seats.
A
20
Downloaded from www.Manualslib.com
Scope of delivery
Quantity Designation
1 2
2 2
3 2
4 2
5 1
6 1
– 1
– 12
– 12
– 1

Intended use

NOTICE!
For vehicles equipped with side airbags in the seat backrests, seat
occupancy detection or child seat detection, observe the vehicle
manufacturer's specifications.
manuals search engine
Seat surface heating element
Backrest heating element
Switch connection cable
Switch
Heating element connection
cable – switchbox
Switchbox
Drill template
Double-sided adhesive tape
Insulating material
Operating manual
MagicComfort MSH200
Item no.
9101700011
9101700012
9101700021
9101700018