Profi-Partner JS-PHA0118 Handbuch Seite 31


When working outdoors, be aware of the wind direction. Wind can carry the coating substance across
greater distances - thus causing damage. When working indoors, provide for adequate ventilation.

Do not let children handle the device.

Never open the device yourself in order to carry out repairs in the electrical system!

Do not lay the spray gun.
Parts list
Description (Fig. 1)
1. Air Cap
3. Union nut
5. Trigger
7. Spray gun rear part
9. Flow knob
11. Container
Coating Materials Suitable for Use
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes, automotive finishes,
staining sealers and wood sealer-preservatives.
Unsuitable coating material:
Corrosive paints, paints contain heavy abrasive constituents
Fig.1
2. Two nozzles (diameter:1.8mm and 2.6 mm) for
different paint and glaze viscosities
4. Spray gun front part
6. Release button
8. Air filter cover
10. cord coupler
GB