Technical Characteristics; Personal Protective Equipment - Kubota Rc44C-Fc3 Bedienungsanleitung

more information, contact your dealer.
7) If the safety and
Check the list of signs in the relative safety section. Keep the signs free of dirt, dust or mud.
8) Keep your body, especially hands and feet, away from moving parts.
9) Do not use the attachment if the covers and guards are not in good condition and correctly positioned.
Do not use the attachment if the safety elements are not in good working order.
Never tamper with the safety elements for any reason whatsoever.
10) If you hit or pick up an object, stop the machine straight away. Disconnect the PTO and switch off the motor, then
lay the attachment on the ground and check it thoroughly. Before starting it up again, make sure the best working
conditions have been restored.
11) When you're not using the attachment, disable the PTO* (*power take-off that activates it) and lower it to the
ground. Switch off the motor and remove the key.
12) Before carrying out any maintenance work on the attachment, make sure it's switched off and disconnected from
the machine.
13) Use the attachment at a speed compatible with the safety requirements, the characteristics of the model used,
and the road conditions.
15) When using and servicing the attachment, wear suitable clothing: goggles, gloves and other items, along with
slip-proof accident prevention shoes.
16) Use the attachment in conditions of good visibility.
17) All operators must receive professional, practical training.
18) When working, always wear resistant footwear and long trousers. Don't use the attachment while wearing
sandals or in bare feet.
19) Carefully inspect the area where the attachment is to be used, removing any objects that the attachment
might pick up and launch.
20) Always disconnect the PTO when moving the machine from one area to another.
21) Whenever you leave the machine unattended, even just for a moment, engage the parking brake and dis-
connect the PTO.
22) Pay particular attention to people and obstacles when making reverse movements.
WARNING: all the maintenance, cleaning and mounting/demounting of the attachment must be carried
out by skilled personnel. The machine must be on level ground, with the PTO disengaged and the parking
brake applied.
The motor must be switched off and the key removed.

7. TECHNICAL CHARACTERISTICS

LAWNMOWER DECK 112
Length (mm)
Width (mm)
Weight (kg)
Blades
Blade rotation
Wheels/Tyres
Cutting height adjustment (cm)
Effective cutting width (mm)
For noise level and vibration values, see the machine manual

8. PERSONAL PROTECTIVE EQUIPMENT

Personal protective equipment (PPE) is the equipment worn by the worker to protect himself/herself against
one or more risks that occur during work, maintenance and repair operations that could threaten their safety or
health during work.
Always use (PPE) during work and maintenance operations, even if the risk of accidents is reduced to a mini-
mum, to prevent those risks that cannot be eliminated, i.e. the "residual risks".
Use the suitable PPE for each specific procedure. Personal protective equipment that may be required includes
safety shoes, protective glasses and / or a face guard, helmet, work gloves, respirators and hearing protection.
warning signs are damaged,
See figure 7.
illegible or missing,
RC44C-FC3
2565
1120
75
2 discs with duel retractable blades
counter-rotating with gear boxes
2 8x3, 00-4 swivel
1-8
1100
See figure 8.
have them replaced.
EN
9