17. DRIVING ON THE ROAD
The RC44C-FC3 mower decks can be mounted on the "FC3" machine (*) when driving on the road.
Driving on the road is only allowed if the attachment is fully raised and secured to the machine chassis with the
special mechanical block.
(*): Only road-approved versions.
18. ATTACHMENT LEFT UNUSED
If the mower decks have to be left unused for a long time, you are advised to follow these steps to ensure they
remain in good working order for a long time:
1) Clean carefully.
2) Do a general check of the condition of the bodywork and mechanical parts of the mower.
3) If necessary, carry out the routine maintenance tasks described above.
4) Store the attachment in a dry, well-aired place.
5) Cover with a waterproof tarpaulin.
19. SAFETY LABELS
19.1 KEY
See figure 19.1
LABEL
NUMBER
10
11
12
13
14
15
16
17
18
19
20
20. GENERAL NOTES
A.
For technical interventions not covered by this manual, contact one of our authorised assistance centres.
B.
Keep the use and maintenance manual in a safe place and do not modify it. This manual may be modified without
prior warning or notice to include variations and improvements to units already consigned. The reproduction or
translation of any part of this manual is forbidden without written consent from the owner.
C.
The RC44C-FC3 mower decks have been specifically designed for our "fc3" multi-purpose machines.
See figure 17.
See figure 19.
DESCRIPTION
1
Maximum permitted tilt
2
Do not go on slopes with elevator open
3
Turbine hazard
4
Elevator hazard
5
Blade coupling
6
Parking brake
7
Machine moving, keep a distance
8
Keep a distance, moving parts
Warning sign: Stop the engine, remove the key, read the
9
manual before carrying out repair or maintenance work
Do not approach the machine until all the parts are
stationary
Risk of crushing. Do not stand between the machine
and the attachment
Read the instruction manual before using the machine
Do not put your hands near the transmission shaft
Danger flying objects
Keep at a safe distance
Do not put your hands near the fan blades
Do not put your hands near the transmission belts
Battery cut-off switch
Lifting point
ROPS safety
EN
13