Ripmax SIGMA E Q Mini Bedienungsanleitung Seite 5
Intelligentes balancer ladegerät mikroprozessorgesteuertes schnelllade-/entladegerät mit eingebautem balancer, usb pc link und temperatur sensor. ladestrom bis zu 4,5a, 1-4 zellen li-ion/li-fe, 1-10zelliger ni-cd/ni-mh, 2-12v bleiakku (pb)
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
Controls and Connections (Continued)
Always connect the charge lead to the charger first. Then connect the battery to the
charge lead. Always match polarities on the battery wires, charge leads and banana
jacks - black connections to black (-), red connections to red (+).
Balance Ports: To connect an adapter of balancing of lithium batteries
Determining Battery Type and Specifications
Rated Voltage: If not printed on the battery's label, consult your battery supplier or
determine the proper pack voltage as follows (refer to the chart below).
Number of Cells
1 Cell
2 Cells
3 Cells
4 Cells
A. NiMH and NiCd: number of cells x 1.20
B. LiPo batteries: Number of cells x 3.70
C. Li-Ion batteries: number of cells x 3.60
D. LiFe batteries (LiFe Source): number of cells x 3.30
LiPo, Li-Ion and LiFe Pack Voltages
Li/Fe
3.3V
6.6V
9.9V
13.2V
- 5 -
Li-Ion
3.6V
7.2V
10.8V
14.4V
14.8V
LiPo
3.7V
7.4V
11.1V
Inhaltsverzeichnis
