Important Precautions - Ripmax Sigma E Q Mini Bedienungsanleitung
Intelligentes balancer ladegerät mikroprozessorgesteuertes schnelllade-/entladegerät mit eingebautem balancer, usb pc link und temperatur sensor. ladestrom bis zu 4,5a, 1-4 zellen li-ion/li-fe, 1-10zelliger ni-cd/ni-mh, 2-12v bleiakku (pb)
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
Important Precautions
•
DO NOT leave the charger unattended while in use.
•
Disconnect the battery and remove the input power from the charger immediately
if the charger or battery becomes hot!
•
DO NOT attempt to charge incompatible types of rechargeable batteries as this
could result in permanent damage to the battery and charger.
•
DO NOT use automotive type battery chargers to power the charger.
•
DO NOT allow water, moisture or foreign objects into the charger.
•
DO NOT attempt to use batteries with more cells or total voltage than listed in the
specifications.
•
DO NOT overcharge batteries as this can cause permanent damage. Do not use
a charge current rate which exceeds the safe levels of the battery.
•
DO NOT place the charger or battery on flammable surfaces or near combustable
materials while in use, such as a carpet, cluttered workbench, paper, plastic, vinyl,
leather and wood, inside an R/C model or full size car.
•
The circuit is designed to be powered by an 11~18V DC or 100~240V AC power
source only. NEVER CONNECT BOTH AT THE SAME TIME.
•
Allow the charger and battery to cool down between charges.
•
Always disconnect the charger from the power source when not in use.
- 3 -
Inhaltsverzeichnis
