Using The Blind - Dometic 9104100052 Montage- Und Bedienungsanleitung

Using the blind

4 Using the blind
4.1 Closing the blind
A
NOTICE! Risk of damage due to a build-up of heat between the
roller blind and the window.
In strong sunlight, only close the blackout roller blind two thirds of the
way.
➤ Connect the handle strip of the blackout roller blind (fig. 9 1, page 7) with the
handle strip of the flyscreen (fig. 9 2, page 7).
To do so, press the push buttons (fig. 9 3, page 7) together and draw both
handle strips together.
➤ Lock the flyscreen (fig. 0 2, page 7) into place on the blackout roller blind
(fig. 0 1, page 7).
➤ Press the push buttons (fig. 0 3, page 7) and push the roller blinds that are now
locked together into the desired position.
➤ Release the push buttons and latch the roller blinds into the next catch point.
There are catch points at the respective end positions of the roller blinds and in
the centre of the guide rails.
4.2 Opening the blind
➤ Guide the roller blind (fig. a 2, page 8) downwards with your hand.
➤ Latch the roller blind into the lowest position, so that the flyscreen is rolled up in
its cassette.
➤ Separate the roller blinds by pressing the locking mechanism (fig. a 3, page 8).
Do not let the blackout roller blind spring back.
➤ Latch the blackout roller blind (fig. a 1, page 8) into the desired catch point.
12
Dometic
EN