MAX Systems MultiMax V8 Kurzanleitung Seite 9

QuickStart | inSert/replace ink cartridge
Your new colleague for professional printing and contour cutting of signs & labels!
Fill me with the ink cartridges and the supplied film. See our step-by-step instructions for details.
Connect me to the power supply, connect me to the network via LAN cable (not supplied), and turn me on.
Start the Utility software and follow the instructions there (connect PC to V8, select "MAX Ink2" ink and create a new media
with automatic setup, e.g., name it "Vinyl Film 100µm"). Create a test print ("Position Adjustment for Printing & Cutting" →
Now I'm ready. You can open the SignMax software (install it first if necessary) and design, print, and cut your labels as
Insert/replace ink cartridge
Shake the ink cartridge for about 20 seconds before
inserting it.
Always insert the corresponding colour into the correct ink
slot, paying attention to the color markings. Push the ink
cartridge all the way in until you hear a beep.
QUICKSTART GUIDE
Hello, here I am!
1
Insert film & ink
2
Switch on
3
Software settings & test print
"Output 1").
4
Get started
desired!
1.
3.
Open the left cover on the device.
Close the cover, turn on the device, and open the „Utility"
software on your PC. Follow the step-by-step instructions
in the utility windows (select „MAX Ink2" ink). The ink filling
will start at the end.
EN
2.
4.
9