Cleaning And Maintenance - Princess 01.249422.01.001 Benutzerhandbuch

sa
• Latte button shows a breathing (pulsing) light, others turn OFF. Double Cup can be selected within
3 seconds.
• Milk foam dispenses first, the system cools automatically, coffee is dispensed, the buzzer beeps once at
completion, indicators turn steady ON, and the cleaning prompt flashes.
Standalone Milk Foam Function
Produces milk foam only (no coffee extraction).
• With the milk tank connected and preheating complete, press and hold the Latte button B
seconds to start.
a
• The Latte button B
• Place a cup under the milk outlet tube.
Discharge of hot water/steam to the drip tray A
•
• Milk is foamed and dispensed until the set volume is reached (approx. 200 ml).

CLEANING AND MAINTENANCE

To keep your espresso machine working well and your coffee tasting great, follow these cleaning steps
every 2 to 3 months:
1. Self-clean program
• When the device is in standby mode or the cleaning indicator light is flashing, fill the milk tank A
water up to the MAX position. With the milk tank closed and the heating function enabled, press and hold
the Double Cup button B
and the cleaned water flows out through the milk outlet tube until the cleaning process is completed. The
machine returns to the preheating state, and the three indicator lights slowly flash. This indicates that the
cleaning function has been completed. And it is program for clean the milk tank.
2. Descale the machine
w
• Fill the water tank A
y
milk tank A is closed and in place. Press and hold the Espresso B
simultaneously for 3 seconds to activate the descaling mode. The machine will circulate water through
the coffee outlet and milk outlet in repeated cycles. This process runs for 6 cycles and then automatically
returns the machine to the preheating state.
• Use a coffee machine descaling agent. Mix it with water in a 4:1 ratio (4 parts water to 1 part descaler), or
follow the instructions on the product label.
• If you don't have a descaling agent, you can use citric acid instead. Mix 100 parts water to 3 parts citric
acid.
Important: After the cleaning process is completed, it is necessary to remove any remaining citric acid or
cleaning agent from the machine. Wash the machine with clean water 2-3 times according to the coffee/hot
water preparation process: There is no need to add coffee powder when cleaning the coffee machine.
Scale Removal Reminder
• The coffee machine tracks the number of brewing cycles. When it reaches 300 uses, the Espresso B
p
Cappuccino B , and Latte B
Note: This reminder does not stop the machine from operating. However, the lights (Espresso, Cappuccino,
Latte, and Double Cup) will continue flashing slowly in sequence until the descaling process is completed
STORAGE
Unplug the device whenever it is not in use. Allow it to cool, then store it in a safe, dry location. Never wrap
the cord around the appliance. This will cause the cord to wear and break prematurely. Handle the cord
carefully and avoid jerking, twisting, or straining it, especially at plug connections.
© Princess | Espresso Machine with milk
shows a breathing (pulsing) light and other buttons turn OFF.
s
for 3 seconds to enter the cleaning mode. The water pump starts working,
to the MAX level and add one packet of descaling agent or citric acid. Ensure the
a
lights will slowly flash in sequence as a reminder to perform descaling.
q
during heating is normal.
o
10
a
for 3
y
a
and Latte B buttons
| 01.249422.01.001
with
o
,