Appliance Self-Test; Starting The Appliance Self-Test; Ending The Appliance Self-Test; Customer Service - Bosch KAN Serie Montage- Und Gebrauchsanleitung

en

Appliance self-test

Your appliance features an automatic self-test program
which shows you sources of faults which
may be repaired by customer service only.

Starting the appliance self-test

1. Switch off the appliance and wait 5 minutes.
2. Switch on the appliance and within the first
10 seconds hold down one of the "super" buttons, 2
or 9, for 3-5 seconds until an acoustic signal
sounds.
The self-test programme starts.
While the self-test is running, a long acoustic signal
sounds.
When the self-test ends and an acoustic signal sounds
twice, your appliance is in working order.
If the "super" button flashes for 10 seconds and
5 acoustic signals sound, there is a fault. Inform

customer service.

Ending the appliance self-test

When the programme has ended, the appliance
switches over to normal operation.
36
Customer service
Your local customer service can be found
in the telephone directory or in the customer-service
index. Please provide customer service with
the appliance product number (E-Nr.) and production
number (FD-Nr.).
These specifications can be found on the rating plate.
To prevent unnecessary call-outs, please assist
customer service by quoting the product
and production numbers. This will save you additional
costs.

Repair order and advice on faults

Contact information for all countries can be found
on the enclosed customer service list.
GB 0344 892 8979 Calls charged at local or mobile rate.
IE 01450 2655 0.03 € per minute at peak. Off peak
0.0088 € per minute.
US 800 944 2904 toll-free