Important Messages And Frequently Asked Questions - Seecode tube HF920 Bedienungsanleitung

7.

Important Messages and Frequently Asked Questions

Q1: Message "Battery Low" displayed on the screen
When this message is displayed on the screen, please charge your battery as soon as possible.
Q2: Cannot power on Seecode Tube after charging more than 20 minutes
For the first-time usage, Seecode Tube should be charged for at least 40 minute before tuning it on. It is
recommended that the battery should be fully charged before using Seecode Tube.
Q3: Cannot hear anything on Seecode Tube
You should check the followings:
•
Seecode Tube is power on
•
Seecode Tube has paired with a Bluetooth device
•
Seecode Tube has connected with a Bluetooth device. The handset that supports Handsfree Profile is an
exception.
•
Seecode Tube and handset are within 10m working distance
•
The environment in which the Seecode Tube and handset stay has good signals.
Q4: Seecode Tube cannot be found when a handset tries to pair with it
Seecode Tube may not be in the pairing mode.
Q5: Does the paired Seecode Tube or the paired handset need to be repaired after powering off?
No. Please note that for the handset that supports handsfree profile, Seecode Tube and the handset must be
connected before making any call. For details, refer to "2.7.4".
Q6: Why does the voice dialing not work?
Check whether your handset supports voice dialing or not and then make sure you have recorded voice tags.
Please note that noisy environment will also affect voice dialing.
Q7: How can I upgrade my Seecode Tube to the latest software version?
For software upgrade, please refer to Chapter 5 " Upgrade Software ".
If you cannot upgrade the software by yourself, you can send your Seecode Tube to your appointed local
service center and ask the service personnel to do it.
If errors happen in your upgrade and cause function failure, please send your Seecode Tube to your local
service center for help.
.
Seecode Tube User Manual
30