Call Functions; Basic Call Operations - Seecode tube HF920 Bedienungsanleitung

Seecode Tube User Manual
If Seecode Tube has already been paired with the handset, you can press button for connection or initiate a
connection after Seecode Tube is found in the list on the handset. During the connection, the icon indicator will
be displayed on the screen. When the HF connection is established, you will hear voice prompt "Phone connected"
and see icon indicator displayed. If the handset supports Bluetooth A2DP, press button to establish A2DP
connection between Seecode Tube and the handset. When the A2DP connection is established, icon indicator will
be displayed on the screen of Seecode Tube.
Note:
Some handsets can establish A2DP connection together with HF connection.
Disconnecting Seecode Tube from Bluetooth handset
When HF connection is already established between Seecode Tube and the handset, but no call is on, you can press
and hold button for 3 seconds to drop the connection, or follow the handset's manual to drop the connection from
the handset side.
After the disconnection, you will hear voice prompt "Phone disconnected" and the icon indicator will disappear.
If A2DP connection also exists, you need to press and hold button for 3 seconds to drop the A2DP connection
first, and then press and hold button for 3 seconds to drop the HF connection. After the A2DP connection is
removed, the icon indicator disappears on the screen of Seecode Tube.
Note:
For some handsets, the HF connection is removed at the same time when the A2DP connection is removed.
Reconnection
Seecode Tube provides the function of auto reconnection.
You can find the submenu Reconnection in the menu .
If Enable is selected in the submenu Reconnection, the reconnection happens when accidental disconnection
occurs. The reconnection is divided into three stages:
1. Within the 10 seconds after the disconnection happens: Seecode Tube keeps trying to reconnect.
2. Within the 10 minutes after the disconnection happens: Seecode Tube tries to reconnect every 10 seconds.
3. Within the 30 minutes after the disconnection happens: Seecode Tube tries to reconnect every 30 seconds.
If connection fails to be established within 30 minutes, Seecode Tube stops the auto reconnection.
If Disable is selected in the submenu Reconnection, Seecode Tube will keep trying to reconnect within the 10
seconds after the disconnection happens. If no connection is established within the 10 seconds, you should try to
establish the connection manually.

2.6 Call Functions

2.6.1 Basic Call Operations

Answer a call: Press button .
Reject a call: Press and hold button for 3 seconds.
End a call: Press button .
Redial: When Seecode Tube is in standby mode, press and hold button for 3 seconds.
. 14