Phonebook Operations (Optional); Download/Synchronize Phonebook; Initiate Phonebook Downloading On Seecode Tube; Initiate Phonebook Synchronization On Handset - Seecode tube HF920 Bedienungsanleitung

Seecode Tube User Manual
3.

Phonebook Operations (Optional)

3.1 Download/Synchronize Phonebook

3.1.1 Initiate Phonebook Downloading on Seecode Tube

Connect Seecode Tube with the handset before the downloading. Press button to enter the main menu. Select
and then select the submenu Download. If no problem exists in handset compatibility, the downloading starts.
You will hear the voice prompt "Start downloading. Please wait". Icon indicator will be displayed on the screen
till the downloading is completed. The downloaded phonebook will replace the existing phonebook stored in
Seecode Tube. When the downloading is completed, you will hear the voice prompt "Download completed" and
the icon indicator will disappear.
If Seecode Tube does not have enough space to save all the phonebook records, the downloading will be terminated
when the space is run out and the message "Full Record!" will be displayed on the screen. The phonebook records
downloaded before the downloading stops will be saved in Seecode Tube. Seecode Tube can save up to 400
phonebook records.
If there is the handset compatibility problem, the downloading will be terminated immediately. You will hear the
voice prompt "Automatic transfer not supported by phone" and see the message "Sync Failed!" displayed on the
screen. The original phonebook records will remain in Seecode Tube.
Note that, you can try to send phonebook records one by one to Seecode Tube from the handset if you fail to initiate
phonebook downloading from Seecode Tube side.

3.1.2 Initiate Phonebook Synchronization on Handset

For detailed operation procedure, refer to your handset's user manual. Ensure that before the synchronization starts,
Seecode Tube is in standby mode with no Bluetooth connection established with the handset. Icon indicator will
be displayed on the screen until the synchronization is completed or the memory space of Seecode Tube is run out.
If there is compatibility problem, your handset will display error messages (check your handset for details).
Note:
For different models of handsets, phonebook synchronization may be different.

3.2 Use Phonebook

Display
Phonebook
When Seecode Tube is in standby or connected mode, press and hold button for 3 seconds to display the
phonebook or use the menu to display the phonebook (for details, refer to section 2.4.1). If there is no record in the
phonebook, the message "No Record!" will be displayed on the screen. Otherwise, alphabet index of the
phonebook will be displayed. The alphabet index starts from A to Z. Records that do not belong to this index are
categorized into "...". You can press button or to scroll up or down the index, and press button to select
the highlighted character and display all the records with this character as the initial. If no record is found with this
character as the initial, records with the following character as the initial are displayed.
. 19