Turn On/Off Seecode Tube; Menu Operations; Main Menu - Seecode tube HF920 Bedienungsanleitung

2.3 Turn on/off Seecode Tube

Turn on Seecode Tube: Press and hold button
ready" and the word "Tube" appears on the screen.
Turn off Seecode Tube: Press and hold button
power off" and the screen is off .
Reset: The reset key is located on the side of Seecode Tube. When Seecode Tube is locked because of any
misoperation, you can recover it by pressing the reset key.

2.4 Menu Operations

2.4.1 Main Menu

A user-friendly menu is provided to assist the user to use the product. Listed below are menu page contents and the
usage of each menu item:
: Phonebook menu containing three submenus:
View: Display phonebook records
Download: Download the phonebook records from the handset
Erase: Delete all the phonebook records stored in Seecode Tube
Remarks: Download submenu is displayed on the screen only if the HF/HS connection between the
handset and Seecode Tube is established. In addition, it only works with compatible handsets.
: Call history menu containing two submenus:
Incoming: Select to display the following two submenus:
Display incoming call history records
View:
Delete all incoming call history records stored Seecode Tube
Erase:
Outgoing: Select to display the following two submenus:
Display outgoing call history records
View:
Delete all outgoing call history records stored in Seecode Tube
Erase:
: Hotkey operation menu. This menu contains two submenus:
View: Display the current hotkey setting
Erase: Remove the current hotkey setting
: System setting menu containing seven submenus:
Backlight: Select to display the following submenus. Select one of them to set the screen protection
time.
- 10 Sec
.
Figure 3: Mounting Seecode Tube
for at least 3 seconds until you hear the voice prompt "Tube
for at least 6 seconds until you hear the voice prompt "Tube
Seecode Tube User Manual
11