Call Operation; Pairing/Connecting With Other Bluetooth Device; Pairing With Other Bluetooth Device; Pairing And Connecting With Bluetooth Usb Dongle - Seecode tube HF920 Bedienungsanleitung

2. Initiate the connection on Seecode Tube.
When Seecode Tube is in standby mode (no Bluetooth connection exists), press button
starts to connect the last handset connected with it. After the connection is established, Seecode Tube
automatically starts to connect the second last handset connected to it.
Note: If the handset which you want to connect to Seecode Tube is not the last or second last handset
connected with Seecode Tube, you need to initiate the connection on the handset.
3. Initiate the connection on the handset.
Start the Bluetooth connection on the handset following the user manual of the handset.
Note: The second connection can be started only after the first one is successfully established.
When both of the two handsets are successfully connected, the first one will be the active handset and the second
one will be the standby handset. The active/standby relation can be changed only after the first handset is
disconnected. Only the name of the active handset can be displayed on the screen of Seecode Tube.
Any call operation initiated by Seecode Tube is performed only on the active handset, for example, redialing and
voice dialing.
Any operation initiated by either active or standby handset can be performed on Seecode Tube in the same way as
the single-link.

2.8.2 Call Operation

When two handsets are connected with Seecode Tube simultaneously:
1. If only one handset receives a call, the call will be transferred to Seecode Tube and all the operations will
be the same as those of single-link.
2. If the two handsets receive calls at the same time, Seecode Tube can accept only the call which reaches it
first. In this case, all the call operations on Seecode Tube will act on this call only, including call waiting
and conference call. When the first call is ended, you must long press button
from the other handset to Seecode Tube. Otherwise, the other call will stay on the handset.

2.9 Pairing/Connecting with Other Bluetooth Device

2.9.1 Pairing with Other Bluetooth Device

Besides the Bluetooth handset, Seecode Tube can be paired with other Bluetooth devices to establish short-distance
Bluetooth communication. For how to operate Seecode Tube for the pairing, refer to section 2.5.1. For how to
operate the Bluetooth device for the pairing, refer to its user manual.
Seecode Tube can save the pairing information of up to 8 Bluetooth devices including the Bluetooth handset. The
information is saved in the sequence of the pairing. For how to remove the pairing information from Seecode Tube,
refer to section 2.5.2.
After the pairing, wireless short-distance communication can be established between any of the Bluetooth devices
and Seecode Tube. For how to establish the Bluetooth connection, refer to section 2.5.4.

2.9.2 Pairing and Connecting with Bluetooth USB Dongle

Before pairing and connecting, please ensure your USB Dongle has already been connected with PC and the IVT's
BlueSoleil driver has been installed in PC.
Detailed operation procedures are as follows:
.
Seecode Tube User Manual
.Seecode Tube
to transfer the other call
17